STONEX R6 Series - Tools; Calibration

R6,Tools
29
5Tools
5.1 Calibration
Description
TheCALIBRATIONmenucontainstoolstobeusedfortheelectroniccalibrationoftheinstru‐
ment.Usingthesetoolshelpstomaintainthemeasuringaccuracyoftheinstrument.
Access
1) SelectToolsfromtheMAIN MENU.
2) SelectCalibr.fromtheTOOLS MENU.
3) SelectacalibrationoptionfromtheCALIBRATIONscreen.
Calibrationoptions
IntheCALIBRATIONscreenthereareseveralcalibrationoptions.
5.2 AutoStartRoutine
Description
ThroughtheAutoStarttool,itispossibletorecordauserdefinedsequenceofkeypressesso
that,afterswitchingontheinstrument,aparticularscreencanbedisplayedaftertheLevel &
PlummetscreeninsteadoftheMAIN MENU.Forexample,thegeneralSETTINGSscreenfor
configuringtheinstrumentsettings.
Access
1) SelectToolsfromtheMAIN MENU.
2) SelectAuto St.fromtheTOOLS MENU.
Autostartstepbystep
1) PressRECintheAUTO STARTscreen.
2) PressOKtoconfirmtheinformationmessageandbegintherecordingprocess.
Menuselection Description
HA-Collimation Referto"11.3CalibratingLine‐of‐SightandVerticalIndexError".
Vertical Index Referto"11.3CalibratingLine‐of‐SightandVerticalIndexError".
View Calibration
Data
DisplaysthecurrentcalibrationvaluesthathavebeensetforHA‐Collima‐
tionandV‐index.