STONEX R6 Series - Applications - Getting Started

R6,Applications - Getting Started
40
8 ApplicationsGettingStarted
8.1 Overview
Description
Applicationsarepredefinedprograms,thatcoverawidespectrumofsurveyingdutiesandfacil‐
itatedailyworkinthefield.Thefollowingapplicationsareavailable,althoughapplicationpack‐
agesforeachinstrumentmayvaryfromthatstatedbelow:
•Survey
• ReferenceElement
•COGO
• MissingLineMeasurement
•Resection
•SetOut
•Area&Volume
• RemoteElevation
•Construction
8.2 StartinganApplication
Access
1) SelectAppsfromtheMAIN MENU.
2) Press tomovethroughthescreensofavailableapplications.
3) Pressafunctionkey,F1‐F4,toselectthespecifiedapplicationintheAPPSmenu.
Presettingsscreens
Pre‐settingsforSurveyisshownasanexample.Anyadditionalsettingsforparticularapplica‐
tionsareexplainedwithinthechaptersforthoseapplications.
[ • ] = Settinghasbeenmade.
[ ] = Settinghasnotbeenmade.
F1-F4
Toselectmenuitem.
Field Description
Select Job Todefinethejobwheredatawillbesaved.Referto"8.3SelectingtheJob".
Select Station Todefinethecurrentpositionoftheinstrumentstation.Referto"8.4
SelectingtheStation".
Select Orientn. Todefinetheorientation,horizontaldirection,oftheinstrumentstation.
Referto"8.5SelectingtheOrientation".