STONEX R6 Series - Reference Element - Reference Line; Overview

R6,Applications
47
SURVEY
Nextstep
• Either,pressALLtorecordanotherpoint.
• Or,pressESCtoexittheapplication.
9.3 ReferenceElementReferenceLine
9.3.1 Overview
Description
ReferenceElement‐Lineisanapplicationthatfacilitatestheeasysetoutorcheckingoflines,
forexample,forbuildings,sectionsofroad,orsimpleexcavations.Itallowstheusertodefinea
referencelineandthencompletethefollowingtaskswithrespecttothatline:
• Line&offset
• Setoutpoints
Access
1) SelectAppsfromtheMAIN MENU.
2) SelectReference ElementfromtheAPPSmenu.
3) Completeapplicationpre‐settings.Referto"8Applications‐GettingStarted".
4) SelectLine
Nextstep
Definethebaselineforthereferenceline.
I Pt
Toswitchbetweenindividualandcurrentpoint
numbers.
CODING
Tofind/entercodes.Referto"7Coding".
Field Description
Comment /
Code
CommentorCodenamedependingonthecodingmethod.Twocodingmethods
areavailable:
1) Commentcoding:Thistextisstoredwiththecorrespondingmeasure‐
ment.Thecodeisnotrelatedtoacodelist,itisjustasimplecomment.A
codelistontheinstrumentisnotnecessary.
2) Expandedcodingwithcodelist:Press CODING.Thecodethatwas
enteredissearchedforwithinthecodelistanditispossibletoadd
attributestothecode.