STONEX R6 Series - Selecting the Station; Selecting the Orientation

R6,Applications - Getting Started
42
8.4 SelectingtheStation
Description
Allmeasurementsandcoordinatecomputationsarereferencedtothesetstationcoordinates.
Thestationcoordinatesthataresetmustinclude:
• atleastgridcoordinates(E,N),and
• thestationheight,ifrequired.
Thecoordinatescanbeenteredmanuallyorselectedfromthememory.
Access
SelectSelect StationinthePre-settingsscreen.
Stationinput
)
Ifnostationwassetandanapplicationwasstarted,orifinSurveyandameasurementwas
recorded,thenthelaststationissetasthecurrentstation.
Nextstep
TheInst.H.fieldappearsoncethestationcoordinateshavebeenentered.Entertheinstrument
heightifdesiredandpressOKtoreturntothePre-Settingsscreen.
8.5 SelectingtheOrientation
8.5.1 Overview
Description
Allmeasurementsandcoordinatecomputationsarereferencedtotheorientationoftheset
station.Theorientationcanbeenteredmanuallyordeterminedfrompointsthatareeither
measuredorselectedfromthememory.
Directions
XEasting
YNorthing
ZHeight
Station coordinates
Stn.X Eastingcoordinateofstation
Stn.Y Northingcoordinateofstation
Field Description
Stn Stationnameofapreviouslysavedstationposition.
STn.X
STn.Y