STONEX R6 Series - Subapplication Measure Line & Offset

R6,Applications
49
REFERENCELINE
Nextstep
Selectasoftkeyoption,MEASorSETOUTtoproceedtoasubapplication.
9.3.4 SubapplicationMeasureLine&Offset
Description
TheMeasureLine&Offsetsubapplicationcalculatesfrommeasurementsorcoordinates,longi‐
tudinaloffsets,paralleloffsetsandheightdifferencesofthetargetpointrelativetothereference
line.
New
Todefineanewbaseline.
MEAS
TomeasureLine&Offset.
SETOUT
Tosetoutpointsorthogonaltothereferenceline.
Field Description
Length Lengthofthebaseline.
Offset Paralleloffsetofthereferencelinerelativetothebaseline(P1‐P2).
Positivevaluesaretotherightofthebaseline.
Line Longitudinaloffsetofthestartpoint,referencepoint(P3),ofthereferenceline
inthedirectionofbasepoint2.
Positivevaluesaretowardsbasepoint2.
Z Heightoffsetofthereferencelinetotheselectedreferenceheight.
Positivevaluesarehigherthantheselectedreferenceheight.
Rotate Rotationofthereferencelineclockwisearoundthereferencepoint(P3).
Ref.Hgt Pt. 1 Heightdifferencesarecomputedrelativetotheheightofthe
firstreferencepoint.
Pt. 2 Heightdifferencesarecomputedrelativetotheheightofthe
secondreferencepoint.
Interpolated Heightdifferencesarecomputedalongthereferenceline.
w/o. Height Heightdifferencesarenotcomputedorshown.