STONEX R6 Series - Subapplication Setout

R6,Applications
50
Exampleofheightdifferencerelativetofirstreferencepoint
Access
PressMEASintheREFERENCE LINEscreen.
Measure
Nextstep
• Either,pressALLtomeasureandrecord.
• Or,press BACKtoreturntotheREFERENCE LINE screen.
9.3.5 SubapplicationSetout
Description
Thesetoutsubapplicationcalculatesthedifferencebetweenameasuredpointandthecalcu‐
latedpoint.Theorthogonal(dLine,dOffset,d.d.Z)andpolar(dHA,d.hDIST,d.d.Z)differences
aredisplayed.
RL Referenceline
1RPStartpoint
MP Measuredpoint
dL Longitudinaloffset
dOffParalleloffset
1RP1streferencepoint
1BP1stbasepoint
RH Referenceheight
Hd Heightdifferencebetweenreferenceandbasepoint
dZ Heightdifferencefromreferenceheight
Field Description
d Line Calculateddistancelongitudinaltothereferenceline.
d Offset Calculateddistanceperpendicularfromthereferenceline.
d.d.Z Calculatedheightdifferencerelativetothedefinedreferenceheight.
1RP
MP
RL
d L+
d Off+
1BP
1RP
RH
Hd+
d Z+
d Z-