STONEX R6 Series - Set Out

R6,Applications
66
Nextstep
PressOKtoreturntotheAPPSmenu.
9.8 SetOut
Description
SetOutisanapplicationusedtoplacemarksinthefieldatpredeterminedpoints.Theseprede‐
terminedpointsarethepointstobestaked.Thepointstobestakedmayalreadyexistinajob
ontheinstrument,orbemanuallyentered.
Theapplicationcancontinuouslydisplaydifferences,betweencurrentpositionanddesiredset
outposition.
SetOutmodes
Pointscanbestakedusingdifferentmodes:Polarmode,OrthogonaltostationmodeandCarte‐
sianmode.
PolarSetOutmode
OrthogonaltoStationSetOutmode
CartesianSetOutmode
1 Currentposition
2 Pointtobesetout
dHDLongitudinaloffset:positiveifpointtobesetoutis
furtheraway.
dHAAngleoffset:positiveifpointtobesetoutistothe
rightoftheactualdirection.
1 Currentposition
2 Pointtobesetout
dL Longitudinaloffset:positiveifnominalpointis
furtheraway.
dT Transversaloffset,perpendiculartoline‐of‐sight:
positiveifnominalpointistotherightofthemeas‐
uredpoint.
dHAAngleoffset:positiveifnominalpointistotheright
oftheactualdirection.
1 Currentposition
2 Pointtobesetout
dE Eastingoffsetbetweenpointtobesetoutandactual
point.
dN Northingoffsetbetweenpointtobesetoutand
actualpoint.
+d HA
+d HD
d HA
+d T
+d L
+d E
+d N