STONEX R6 Series - Selecting the Job

R6,Applications - Getting Started
41
8.3 SelectingtheJob
Description
AlldataissavedinJobs,likefiledirectories.Jobscontainmeasurementdataofdifferenttypes,
forexamplemeasurements,codes,fixedpoints,orstations.Jobsareindividuallymanageable
andcanbeexported,editedordeletedseparately.
Access
SelectSelect JobinPre-settings screen.
SELECTJOB
Nextstep
• Either,pressOKtocontinuewiththeselectedjob.
• Or,pressNEWtoopentheNEW JOBscreenandcreateanewjob.
Recordeddata
Onceajobissetup,allsubsequentrecordeddatawillbestoredinthisjob.
Ifnojobwasdefinedandanapplicationwasstarted,orifinSurveyandameasurementwas
recorded,thenthesystemautomaticallycreatesanewjobandnamesit"DEFAULT".
Nextstep
PressOKtoconfirmthejobandreturntothePre-Settings screen.
Go! Startstheselectedapplication.
NEW
Tocreateanewjob.
Field Description
Job Nameofanexistingjobtobeused.
User Nameofuser,ifentered.
Date Datetheselectedjobwascreated.
Time Timetheselectedjobwascreated.
Field Description