STONEX R6 Series - Missing Line Measurement

R6,Applications
61
9.6 MissingLineMeasurement
Description
MissingLineMeasurementisanapplicationusedtocomputeslopedistance,horizontal
distance,heightdifferenceandazimuthoftwotargetpointswhichareeithermeasured,
selectedfromthememory,orenteredusingthekeypad.
MissingLineMeasurementmethods
Theusercanchoosebetweentwodifferentmethods:
• Polygonal:P1‐P2,P2‐P3,P3‐P4.
• Radial:P1‐P2,P1‐P3,P1‐P4.
Polygonalmethod
Radialmethod
Access
1) SelectAppsfromtheMAIN MENU.
2) SelectMissing Line Meas.fromtheAPPSmenu.
3) Completeapplicationpre‐settings.Referto"8Applications‐GettingStarted".
4) SelectPolygonorRadial.
Missinglinemeasurements
Aftercompletingthemeasurementsrequired,theMLM RESULTscreenwillappear.
T101 1sttargetpoint
T202 2ndtargetpoint
T303 3rdtargetpoint
SD1‐2SlopedistancefromT101‐T202
SD2‐3SlopedistancefromT202‐T303
Az1‐2AzimuthfromT101‐T202
Az2‐3AzimuthfromT202‐T303
1‐4 Targetpoints
SD1‐2Slopedistancefrom1‐2
SD1‐3Slopedistancefrom1‐3
SD1‐4Slopedistancefrom1‐4
Az1‐2Azimuthfrom1‐2
Az1‐3Azimuthfrom1‐3
Az1‐4Azimuthfrom1‐4
CP Centerpoint
SD 1-2
SD 2-3
CP
SD 1-2
SD 1-3
SD 1-4