STONEX R6 Series - Remote Elevation

R6,Applications
69
Graphicalrepresentation
Nextstep
PressCALCtocalculateareaandvolumeandproceedtotheArea & Volume Resultscreens.
2D/3DAREA&VOLUMERESULT
)
Perimeterandvolumeareupdatediffurtherareapointsareadded.
Nextstep
• Either,pressNewtodefineanewarea.
• Or,pressAddTg toaddanewtargetpointtotheexistingarea.
• Or,pressESCtoexittheapplication.
9.10 RemoteElevation
Description
RemoteElevationisanapplicationusedtocomputepointsdirectlyabovethebaseprism
withoutaprismatthetargetpoint.
P0Instrumentstation
P1Targetpointwhichdefinestheslopedreference
plane
P2Targetpointwhichdefinestheslopedreference
plane
P3Targetpointwhichdefinestheslopedreference
plane
P4Targetpoint
a Constantheight
b Perimeter(3D),polygonallengthfromthestartpoint
tothecurrentmeasuredpointofthearea(3D)
c Area(3D),projectedontotheslopedreferenceplane
d Volume(3D)=axc
e Perimeter(2D),polygonallengthfromthestartpoint
tothecurrentmeasuredpointofthearea(2D)
f Area(2D),projectedontothehorizontalplane
g Volume(2D)=fxa
P1
a
a
P2
P3
P4
P0
c
d
b
f
e
g