STONEX R6 Series - EDM Continuous

R6,Functions
37
Nextstep
PressOKtoreturntotheapplicationwhereFNCwasselected.
6.6 EDMContinuous
Description
Thisfunctionactivatesordeactivatesthetrackingmeasurementmode.Thenewsettingis
displayedforaboutonesecondandthenset.Thefunctioncanonlybeactivatedfromwithinthe
sameEDMmodeandprismtype.Thefollowingoptionsareavailable.
)
Thelastactivemeasurementmoderemainssetwhentheinstrumentisswitchedoff.
Mode Off<=>On
IR IR‐Default<=>IR‐Continuous/IR‐Quick<=>IR‐Continuous.
RL RL‐Default<=>RL‐Continuous.