STONEX R6 Series - Safety Directions; General; Intended Use

R6,Safety Directions
88
13 SafetyDirections
13.1 General
Description
Thefollowingdirectionsenablethepersonresponsiblefortheproduct,andthepersonwho
actuallyusestheequipment,toanticipateandavoidoperationalhazards.
Thepersonresponsiblefortheproductmustensurethatallusersunderstandthesedirections
andadheretothem.
13.2 IntendedUse
Permitteduse
• Measuringhorizontalandverticalangles.
• Measuringdistances.
• Recordingmeasurements.
• Visualizingtheaimingdirectionandverticalaxis.
• Datacommunicationwithexternalappliances.
• Computingbymeansofsoftware.
Adverseuse
• Useoftheproductwithoutinstruction.
• Useoutsideoftheintendedlimits.
• Disablingsafetysystems.
• Removalofhazardnotices.
• Openingtheproductusingtools,forexamplescrewdriver,unlessthisisspecifically
permittedforcertainfunctions.
• Modificationorconversionoftheproduct.
• Useaftermisappropriation.
• Useofproductswithobviouslyrecognisabledamagesordefects.
• Usewithaccessoriesfromothermanufacturerswithoutthepriorexplicitapprovalof
Stonex
®
.
• Aimingdirectlyintothesun.
• Inadequatesafeguardsattheworkingsite,forexamplewhenmeasuringonroads.
• Deliberatedazzlingofthirdparties.
• Controllingofmachines,movingobjectsorsimilarmonitoringapplicationwithoutaddi‐
tionalcontrol‐andsafetyinstallations.

Warning
Adverseusecanleadtoinjury,malfunctionanddamage.