STONEX R6 Series - Loading Software

R6,Tools
31
5.4 LoadingSoftware
Description
Toloadapplicationsoftwareoranadditionallanguage,connecttheinstrumenttoGGOviathe
serialinterfaceandloadusing"GGO‐SoftwareUpload".RefertotheGGOonlinehelpforfurther
information.
ForZoom30instruments,thesoftwarecanbeloadedviaaUSBmemorystick.Thisprocessis
describedbelow.
Access
1) SelectToolsfromthe MAIN MENU.
2) SelectLoad FWfromtheTOOLS MENU.
)
• Load FWisonlyanoptionontheTOOLS MENUforZoom30instruments.
• Neverdisconnectthepowersupplyduringthesystemuploadprocess.Thebatterymust
beatleast75%capacitybeforecommencingtheupload.
Loadingfirmwareandlanguagesstepbystep
1) Toloadfirmwareandlanguages:SelectZoom Firmware.TheSelect Filescreenwill
appear.
Toloadonlylanguages:SelectZoom Languages onlyandskiptostep4
2 SelectthefirmwarefilefromthesystemfolderoftheUSBmemorystick.Allfirmwareand
languagefilesmustbestoredinthesystemfoldertobetransferredtotheinstrument.
3 PressOK.
4TheUpload Languagesscreenwillappeardisplayingalllanguagefilesinthesystemfolder
oftheUSBmemorystick.SelectYesorNoforalanguagefiletobeuploaded.Atleastone
languagemustbesettoYes.
5 PressOK.
6 PressYesonthepowerwarningmessagetoproceedanduploadthefirmwareand/or
selectedlanguages.
7 Oncesuccessfullyloaded,thesystemwillshutdownandrestartagainautomatically.
EDM-Firmware DisplaystheversionnumberoftheEDMfirmware.
Application
Information
Displaysalistoftheapplicationsavailableontheinstrument.
Field Description