EasyManua.ls Logo

STONEX R6 Series - Page 15

STONEX R6 Series
124 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
R6,Operation
15
Setupstepbystep
1 Extendthetripodlegstoallowforacomfortableworkingposture.Positionthetripodover
themarkedgroundpoint,centringitasbestaspossible.
2 Fastenthetribrachandinstrumentontothetripod.
3 Turnontheinstrument,and,iftiltcorrectionissetto1‐or2‐axis,thelaserplummetwillbe
activatedautomatically,andtheLevel & Plummet screenappears.Otherwise,pressFNC
fromwithinanyapplicationandselectLevel & Plummet.
4 Movethetripodlegs(1)andusethetribrachfootscrews(6)tocentertheplummet(4)over
thegroundpoint.
5 Adjustthetripodlegs(5)tolevelthecircularlevel(7).
6 Byusingtheelectroniclevel,turnthetribrachfootscrews(6)topreciselyleveltheinstru‐
ment.Referto"Levelupwiththeelectroniclevelstep‐by‐step".
7 Centertheinstrumentpreciselyoverthegroundpointbyshiftingthetribrachonthetripod
plate(2).
8 Repeatsteps6and7untiltherequiredaccuracyisachieved.
Levelupwiththeelectroniclevelstepbystep
Theelectroniclevelcanbeusedtopreciselyleveluptheinstrumentusingthefootscrewsofthe
tribrach.
1) Turntheinstrumentuntilitisparalleltotwofootscrews.
2) Centerthecircularlevelapproximatelybyturningthefootscrewsofthetribrach.
3) Turnontheinstrument,and,iftiltcorrectionissetto1‐or2‐axis,thelaserplummetwill
beactivatedautomatically,andtheLevel & Plummetscreenappears.Otherwise,press
FNCfromwithinanyapplicationandselectLevel & Plummet.
)
Thebubbleoftheelectroniclevelandthearrowsfortherotatingdirectionof
thefootscrewsonlyappeariftheinstrumenttiltisinsideacertainlevelling
range.
4 Centertheelectroniclevelofthefirstaxisbyturningthetwo
footscrews.Arrowsshowthedirectionofrotationrequired.
Whentheelectronicleveliscenteredthearrowsarereplaced
bycheckmarks.
5 Centertheelectroniclevelforthesecondaxisbyturningthe
lastfootscrew.Anarrowshowsthedirectionofrotation
required.Whentheelectronicleveliscenteredthearrowis
replacedbyacheckmark.
2
6
7
5
4
5
5
1
3
1
1
Zoom_004

Table of Contents

Related product manuals