STONEX R6 Series - Page 24

R6,Settings
24
Heating On Thedisplayheaterisactivated.
Off Thedisplayheaterisdeactivated.
)
Thedisplayheaterisautomaticallyactivatedwhenthedisplayilluminationis
onandtheinstrumenttemperatureis 5°C.
Data Output Setsthelocationfordatastorage.
Int. Mem. Alldataisrecordedintheinternalmemory.
Interface DataisrecordedviatheserialinterfaceortheUSBdevice
port,dependingontheportselectedintheCOMMUNICA-
TION SETTINGSscreen.ThisData Outputsettingisonly
requiredifanexternalstoragedeviceisconnectedandmeas‐
urementsarestartedattheinstrumentwithMEAS/RECor
ALL.Thissettingisnotrequirediftheinstrumentistotally
controlledbyadatalogger.
GSI Format SetstheGSIoutputformat.
GSI 8 81..00+12345678
GSI 16 81..00+1234567890123456
Mask SetstheGSIoutputmask.
Mask1 Pt,HA,VA,sDIST,ppm+mm,TgtHGT,Instr.h.
Mask2 Pt,HA,VA,sDIST,E,N,H,TgtHGT.
Code saving Setsifthecodeblockissavedbeforeorafterthemeasurement.Referto"7
Coding".
Language Setsthechosenlanguage.Thecurrentloadedlanguage(s)areshown.
AselectedlanguagecanbedeletedbypressingDelLng.Thisfunctionisavail‐
ableifmorethanonelanguageisinstalled,andtheselectedlanguageisnotthe
chosenoperatinglanguage.
Auto-Off Enable Theinstrumentswitchesoffafter20minuteswithoutany
activity,forexamplenokeypressedorverticalandhori‐
zontalangledeviationis ±3".
Disable Automaticswitch‐offisdeactivated.
)
Batterydischargesquicker.
Field Description