Black plate (119,1)
一般Model "A2470GE-B" EDITED: 2010/ 9/ 24
CAUTION
. Do not let dust, oil or water get on
or in the transmitter when repla-
cing battery.
. Be careful not to damage the
printed circuit board in the trans-
mitter when replacing the battery.
. Be careful not to allow children to
touch the battery and any re-
moved parts; children could
swallow them.
. Danger of explosion if battery is
incorrectly replaced. Replace
only with the same or equivalent
type.
. Batteries shall not be exposed to
excessive heat such as sun-
shine, fire or the like.
1. Remove the screw on the key head.
2. Open the key head using a flat-head
screwdriver.
3. Remove the three screws and then
remove the cover.
4. Remove the old battery.
Keys and doors 2-23
– CONTINUED –
2
To Next Page
Loading...
