Black plate (457,1)
一般Model "A2470GE-B" EDITED: 2010/ 9/ 24
& Map light
1. Remove the lens by prying the edge of
the lens with a flat-head screwdriver.
2. Turn the bulb until the flat surfaces at
its ends are aligned vertically.
3. Pull the bulb st raight downward to
remove it.
4. Install a new bulb.
5. Reinstall the lens.
& Dome light
Type A
Type B
1. Remove the lens by prying the edge of
the lens with a flat-head screwdriver.
2. Turn the bulb until the flat surfaces at
its ends are aligned vertically.
3. Pull the bulb straight downward to
Maintenance and service 11-67
– CONTINUED –
11