Black plate (176,1)
一般Model "A2470GE-B" EDITED: 2010/ 9/ 24
3-44 Instruments and controls
matically on or off depending on the level
of the ambient light.
NOTE
The sensitivity of the auto on/off head-
lights can be changed by your
SUBARU dealer. We recommend that
you contact your SUBARU dealer for
details.
! Sensor of the auto on/off headlights
(if equipped)
The sensor is on the windshield glass as
shown in the illustration.
CAUTION
If any object is attached on or near
the sensor, the sens or may not
detect the level of the ambient light
correctly and the auto on/off head-
lights may not operate properly.
& High/low beam change (dim-
mer)
To change from low beam to high beam,
push the turn signal lever forward. When
the headlights are on high beam, the high
beam indicator light “
” on the combina-
tion meter also illuminates.
To switch back to low beam, pull the lever
back to the detent position.
To Next Page
Loading...
