Black plate (472,1)
一般Model "A2470GE-B" EDITED: 2010/ 9/ 24
12-12 Specifications
& Tires
For the tire specifications, see the tire pressure label located on the door pillar on the driver’s side.
Wheel nut tightening torque
120 N·m (12 kgf·m, 89 lbf·ft)*
1
*
2
*1: This torque is equivalent to applying approximately 40 to 50 kgf (88 to 110 lbf) at the end of the wheel nut wrench. If you have tightened the wheel
nuts by yourself, have the tightening torque checked at the nearest automotive service facility as soon as possible.
*2: For the wheel nut tightening procedure, refer to “Changing a flat tire” F9-8.
& Wheel alignment
Sedan
Item
Petrol engine models Diesel engine models
2.0 L 2.5 L non-turbo 2.5 L turbo 3.6 L 2.0 L
Toe Front
0+3mm(0+0.12 in), Toe angle (sum of both wheels): 08+0815’
Rear 0+3mm(0+0.12 in), Toe angle (sum of both wheels): 08+0815’
Camber*
4
Front −0830’+0845’
−0830’+0845’*
2
−0815’+0845’*
3
−0815’+0845’
−0830’+0845’*
1
*
2
−0815’+0845’*
3
Rear −1805’+0845’
−1805’+0845’*
2
−1810’+0845’*
3
−1810’+0845’
−1805’+0845’*
1
*
2
−1810’+0845’*
3
*1: Models with 16-inch wheel tires
*2: Models with 17-inch wheel tires
*3: Models with 18-inch wheel tires
*4: The difference between right-hand camber and left-hand camber should be within 45’ or less.
To Next Page
Loading...
