Black plate (172,1)
一般Model "A2470GE-B" EDITED: 2010/ 9/ 24
3-40 Instruments and controls
ments. If you press the “−” button, the
indicated time will decrease in one-minute
decrements. If you keep the button
pressed, the rate at which the indicated
time changes will speed up.
Multi function display
1) Multi function display switching knob
(left-hand drive models)
2) Multi function display switching knob
(right-hand drive models)
With the ignition switch in the “ON”
position, each successive press of the
multi function display switching knob
toggles the display in the following se-
quence.
& Outside temperature indica-
tor
The outside temperature indicator shows
the outside temperature within a range
from −30 to 508C(−22 to 1228F) in the
multi function display.
The indicator can give a false reading
under any of the following conditions.
. When there is too much sun.
. During idli ng; while ru nning at low
speeds in a traffic jam; when the engine
is restarted immediately following a shut-
down.
. When the actual outside temperature
falls outside the specified indicator range.
To Next Page
Loading...
