Black plate (223,1)
一般Model "A2470GE-B" EDITED: 2010/ 9/ 24
& Displaying radio PS (Pro-
gram Service Name)
If the PS (Program Service Name) is
available, pressing the “TEXT” button
changes the display among PS and
frequency. The initial setting is “PS”.
NOTE
The maximum number of characters
that can be displayed for PS is 8.
& Station preset
Preset buttons
! How to preset stations
1. Press the “FM” or “AM” button to select
FM1, FM2, FM3 (type A audio only) or AM
reception.
2. Press the “
” or “ ” side of the
“SEEK” button or tune the radio manually
until the desired stati on frequency is
displayed.
3. Press one of the preset buttons for
more than 1.5 seconds to store the
frequency. If the button is pressed for less
than 1.5 seconds, the preceding selection
will remain in memory.
NOTE
. If the connection between the radio
and battery is broken for any reason
such as vehicle maintenance or radio
removal, all stations stored in the
preset buttons are cleared. If this
occurs, it is necessary to reset the
preset stations.
. If a cell phone is placed near the
radio, it may cause the radio to emit
noise when the phone receives calls.
This noise does not indicate a radio
malfunction.
! Selecting preset stations
Presetting a station with a preset button
allows you to select that station in a single
operation. Up to six AM, FM1, FM2 and
FM3 (type A audio only) stations each
may be preset.
Audio 5-13
– CONTINUED –
5
To Next Page
Loading...
