Subaru Outback 2011 - To Set Double Locking System; To Cancel Double Locking System

Black plate (121,1)
一般Model "A2470GE-B" EDITED: 2010/ 9/ 24
& To set double locking system
! Setting system using key
1. Remove the key from the ignition
switch and have all occupants get out of
the vehicle.
2. Close all of the doors and the rear gate
(Station wagon) securely.
3. Insert the key into the key cylinder of
the driver’s door, then turn it in the locking
direction to set the double locking system.
All of the doors and the rear gate (Station
wagon) will be locked.
! Setting system using remote trans-
mitter
1. Remove the key from the ignition
switch and have all occupants get out of
the vehicle.
2. Close all of the doors and the rear gate
(Station wagon) securely.
3. Press the “
” button on the transmitter.
The hazard warning flashers will flash
once and the double locking system will
be set. All of the doors and the rear gate
(Station wagon) will be locked.
NOTE
For models with the keyless access
function, it is possible to set the double
locking system by pressing the door
lock button.
& To cancel double locking
system
! Canceling system using key
Insert the key into the key cylinder of the
driver’s door, then turn it in the unlocking
direction to cancel the do uble locking
system. All of the doors and the rear gate
(Station wagon) will be unlocked.
Keys and doors 2-25
– CONTINUED –
2