EasyManua.ls Logo

Subaru Outback 2011 - MODE Button; And Switch; Volume Control Switch

Subaru Outback 2011
495 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Black plate (238,1)
Model "A2470GE-B" EDITED: 2010/ 9/ 24
5-28 Audio
These buttons are located on the spokes
of the steering wheel. They allow the
driver to control audio functions without
taking his/her hands off the s teering
wheel.
& MODE button
This button is used to select the desired
audio mode. Each time it is pressed, the
mode changes to the next one in the
following sequence.
*1: The frequency last received in the selected
waveband will be displayed.
*2: Only when a CD is in the player.
*3: Only when with an auxiliary audio product is
connected.
NOTE
. The MW and LW modes are
displayed on the type A audio. For the
type B audio, those are displayed as
AM mode.
. For some areas, the LW radio mode
is not available.
& and switch
! With radio mode selected
Press the switch to the
or side
briefly to skip to a preset channel. Press
the switch to the
or side for more
than 0.5 second to seek the next recei-
vable station and stop at it.
That stations frequency will be indicated
on the audio display.
! With CD mode selected
Press the switch to the
side to skip
forward in the track/file (track) order. Press
the switch to the
side to skip back-
ward in the track/file (track) order.
The track/file (track) number will be shown
on the audio display.
& Volume control switch
Press the switch to the + side to increase
the volume. Press the switch to the
side to reduce the volume.
A number indicating the volume will be
shown on the audio display.

Table of Contents

Related product manuals