Subaru Outback 2011 User Manual

Black plate (416,1)
一般Model "A2470GE-B" EDITED: 2010/ 9/ 24
11-26 Maintenance and service
& Replacing the air cleaner
element
! Non-turbo models
1) Hydraulic hose (models with a hydraulic
power steering system)
2) Connector
3) Connector cable
4) Clamp
5) Clips
1. For models with a hydraulic power
steering system, remove the hydraulic
hose in the power steering system from
the clip on the right side of the air cleaner
case.
2. Unplug the connector that is attached
to the top of the air cleaner case.
3. To remove the connector cable from
the air cleaner case, remove the clip that
is attached to the connector cable from the
guide lug on the right side of the air
cleaner case.
4. Loosen the screw on the clamp.
5. Unsnap the two clips holding the air
cleaner case cover.
6. Open the air cleaner case and remove
the air cleaner element.
7. Clean the inside of the air cleaner case
and case cover with a damp cloth and
install a new air cleaner element.
8. To install the air cleaner case, insert
the three projections on the air cleaner
case into the slits on the air cleaner case
cover.
9. Install the removed or loosened parts
in the reverse order of removal.

Subaru Outback 2011 Specifications

General

Brand	Subaru
Model	Outback 2011
Category	Automobile
Language	English