EasyManua.ls Logo

Subaru Outback 2011 - Instruments and Controls

Subaru Outback 2011
495 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Black plate (166,1)
Model "A2470GE-B" EDITED: 2010/ 9/ 24
3-34 Instruments and controls
Inside warning
chime
Outside warning
chime (except
China models)
Access key
warning light on
meter
Operation indi-
cator on push-
button ignition
switch
Status Action
Long beep (60
seconds max.)
——
The door lock button was pressed
while carrying the access key and
the push-button ignition switch is in
a position other than OFF (in AT
and CVT models, when the select
lever is in the P position).
Return the access key inside the
vehicle, or switch the push-button
ignition switch to OFF.
*If the push-button ignition switch is
not switched to OFF, the doors
cannot be locked.
Ding
(Flashes 1 sec.
intermittent)
The vehicle was driven while the
access key is not inside the vehicle.
Carry the access key, and drive the
vehicle.
Ding
(Flashes 1 sec.
intermittent)
The push-button ignition switch was
pressed while the access key is not
inside the vehicle.
Carry the access key, and press the
push-button ignition switch.
Ding
Beep, beep,
beep (3 times)
(Flashes 1 sec.
intermittent)
The driver exited the vehicle with
the access key and closed the
drivers door while the push-button
ignition switch is in a position other
than OFF (in AT and CVT models,
when the select lever is in the P
position).
Switch the push-button ignition
switch to OFF, and get out of the
vehicle.
Ding
Beep, beep,
beep (3 times)
(Flashes 1 sec.
intermittent)
A fellow passenger exited the ve-
hicle with the access key and
closed a door other than the drivers
door while the push-button ignition
switch is in a position other than
OFF.
Return the access key to inside the
vehicle, or switch the push-button
ignition switch to OFF.

Table of Contents

Related product manuals