Black plate (167,1)
一般Model "A2470GE-B" EDITED: 2010/ 9/ 24
Inside warning
chime
Outside warning
chime (except
China models)
Access key
warning light on
meter
Operation indi-
cator on push-
button ignition
switch
Status Action
Long beep
(continuous)
Long beep
(continuous)
(Flashes 1 sec.
intermittent)
—
The driver exited the vehicle with
the access key and closed the
driver’s door while the push-button
ignition switch is in a position other
than “OFF” and the select lever is in
a position other than the “P” posi-
tion.
Shift the select lever to the “P”
position, switch the push-button
ignition switch to “OFF” and exit the
vehicle.
Long beep
(continuous)
———
The driver’s door was opened while
the push-button ignition switch is in
a position other than “OFF” and the
select lever is in a position other
than the “P” position.
Shift the select lever to the “P”
position, switch the push-button
ignition switch to “OFF” and exit the
vehicle.
Ding ———The battery of the access key is low.
Replace the battery of the access
key.
———
Flashes in green
(15 seconds
max.)
The engine start procedure was
performed, but the steering is still
locked.
While turning the steering wheel
right and left lightly, depress the
brake pedal and press the push-
button ignition switch.
———
Flashes in or-
ange
A malfunction was detected in the
power system or steering lock.
We recommend that you contact a
SUBARU dealer immediately and
have the vehicle inspected.
Instruments and controls
3-35
– CONTINUED –
3
To Next Page
Loading...
