Black plate (292,1)
一般Model "A2470GE-B" EDITED: 2010/ 9/ 24
7-16 Starting and operating
safe place, and we recommend
that you contact a SUBARU deal-
er immediately.
CAUTION
For AT and CVT models:
. Do not stop the engine while the
select lever is in a position other
than the “P” position.
. If the engine is stopped while the
select lever is in a position other
than the “P” position, the power
will be in “Acc”. If the vehicle is
left in this condition, the battery
may be discharged.
NOTE
By pressing the push-button ignition
switch for 3 seconds or longer during
driving, the engine can be stopped. Do
not stop the engine during driving
except in an emergency.
& When access key does not
operate properly
If the engine start procedures cannot be
operated because of strong radio noise in
the surrounding area or low battery of the
access key, try the following to start the
engine. When the battery of the access
key is discharged, replace it with a new
one.
! Starting engine when access key
does not operate properly
When operating in a location with strong
radio noise, or when the battery of the
access key is low, the power can be
switched to “ON” and the engine can be
started by the push-button ignition switch
in the following procedures.
1. Apply the parking brake.
2. Shift the shift lever in neutral (MT
models) or the select lever in the “P”
position (AT and CVT models).
3. Depress the brake pedal.
4. Depress the clutch pedal (MT models).
5. Hold the access key with the buttons
facing you, and touch the push-button
ignition switch with it.
When the communication between the
access key and the vehicle is completed,
a chime (ding) will sound, and the opera-
tion indicator on the push-button ignition
switch illuminates in green.
6. Within 5 seconds after the operation
indicator illuminates in green, while de-
pressing the brake pedal (all models) and
the clutch pedal (MT models), press the
push-button ignition switch.
CAUTION
Keep metallic objects, magnetic
sources and signal transmitters
away from between the access key
and the push-button ignition switch.
They may interfere with the commu-
nication between th e access key
and the push-button ignition switch.
NOTE
If the engine does not start even
though the above procedure was fol-
lowed precisely, we recommend that
you contact your SUBARU dealer.
To Next Page
Loading...
