Subaru Outback 2011 - Scan

Black plate (231,1)
一般Model "A2470GE-B" EDITED: 2010/ 9/ 24
press the “RPT” button again (type B
audio) and select CANCEL.
The “RDM” indication will turn off, and the
normal playback mode will be resumed.
NOTE
Random playback will be cancelled if
you perform any of the following steps.
. Press the “RPT/RDM” button for 0.5
second or longer and select CANCEL
(type A audio)
. Press the “RPT” button and select
CANCEL (type B audio)
. Press the “
” button
. Press the disc select button
. Press the “SCAN” button
. Press the “LOAD” button when
there is free space in the CD magazine
. Press the “
” or “ ” side of the
“FOLDER” button
& Scan
Type A audio
Type B audio
The scan mode lets you listen to the first
10 seconds of each track/file in succes-
sion. Press the “SCAN/A.S” button (type A
audio) or “SCAN” button (type B audio) to
start scanning upward beginning with the
track/file(s) following the currently se-
lected one.
After all track/file(s) in the disk/folder have
been scanned, normal playback will be
resumed. To cancel the scan mode, press
the “SCAN/A.S” button (type A audio) or
“SCAN” button (type B audio) again.
NOTE
. The scan mode will be cancelled if
you perform any of the following steps.
– Press the “RPT” button (type B
audio)
– Press the “RDM” button (type B
audio)
– Press the “RPT/RDM” button
(type A audio)
– Turn the “TUNE/TRACK” dial
– Press the “
” or “ ” side of the
“FOLDER” button
– Press the “
” button
– Press the “
” or “ ” side of
the “SEEK” button
– Press the disc select button
– Select the radio or AUX mode
– Press the “LOAD” button when
thereisfreespaceintheCD
magazine
– Turn off the power of the audio
equipment
Audio 5-21
– CONTINUED –
5