Black plate (442,1)
一般Model "A2470GE-B" EDITED: 2010/ 9/ 24
11-52 Maintenance and service
& Rear window wiper blade
assembly (Station wagon)
1. Raise the wiper arm off the rear
window.
2. Turn the wiper blade assembly coun-
terclockwise.
3. Pull the wiper blade assembly toward
you to remove it from the wiper arm.
4. Install the wiper blade assembly to the
wiper arm. Make sure that it locks in place.
5. Hold the wiper arm by hand and slowly
lower it in position.
& Rear window wiper blade
rubber (Station wagon)
1. Pull out the end of the blade rubber
assembly to unlock it from the plastic
support.
To Next Page
Loading...
