EasyManua.ls Logo

Subaru Outback 2011 - Page 301

Subaru Outback 2011
495 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Black plate (312,1)
Model "A2470GE-B" EDITED: 2010/ 9/ 24
7-36 Starting and operating
is operating normally.
. Although illuminating after the en-
gine has been started, the warning light
quickly turns off and remains off.
. The warning light illuminates when
the vehicle is being driven, it then turns
off and remains off.
! Vehicle Dynamics Control operation
indicator light
The indicator light flashes during activa-
tion of the skid suppression function and
during activation of the traction control
function.
NOTE
. The indicator light may remain illu-
minated for a while after the engine has
been started, especially in cold weath-
er. This occurs because the engine has
not yet warmed up and is completely
normal. The light will turn off when the
engine has reached a suitable operat-
ing temperature.
. When an engine problem occurs
and the malfunction indicator lamp/
CHECK ENGINE warning light illumi-
nates, the indicator light will also
illuminate.
The following two situations could indicate
malfunction of the Vehicle Dynamics
Control system. If either of these situa-
tions occurs, we recommend that you
have an authorized SUBARU dealer carry
out an inspection of that system at the first
available opportunity.
. The indicator light does not illuminate
when the ignition switch is turned to the
ON position.
. The indicator light fails to turn off after
the engine is started, even when several
minutes have passed to allow the engine
to heat up sufficiently.
! Vehicle Dynamics Control OFF in-
dicator light
The light illuminates when the ignition
switch is turned to the ON position and
turns off after approximately 2 seconds.
The light illuminates when the Vehicle
Dynamics Control OFF switch is pressed
to deactivate the Vehicle Dynamics Con-
trol system.
The following two situations could indicate
a malfunction of the Vehicle Dynamics
Control system. If either of these situa-
tions occurs, we recommend that you
have an authorized SUBARU dealer carry
out an inspection of that system at the first
available opportunity.
. The indicator light does not illuminate
when the ignition switch is turned to the

Table of Contents

Related product manuals