Black plate (449,1)
一般Model "A2470GE-B" EDITED: 2010/ 9/ 24
! Low beam light bulbs
1. Pull off the fender lining. For details,
refer to “Pulling off the fender lining” F11-
10.
2. Remove the bulb cover, by turning it
counterclockwise.
3. Disconnect the electrical connector.
4. Remove the retainer spring.
5. Replace the bulb, then set the retainer
spring securely.
6. Reconnect the electrical connector.
7. Install the bulb cover.
8. After replacing the bulb, reattach the
fender lining.
Maintenance and service 11-59
– CONTINUED –
11
To Next Page
Loading...
