Black plate (68,1)
一般Model "A2470GE-B" EDITED: 2010/ 9/ 24
1-40 Seat, seatbelt and SRS airbags
seatbacks of the rear seats. These marks
indicate the positions of the ISOFIX
anchor bars.
Each anchor bar is located where the seat
cushion meets the seatback.
1. Use the “
” marks to locate the two
anchor bars for the position where you
want to install the child restraint system.
2. While following the instructions sup-
plied by the child restraint system manu-
facturer, connect the connectors of the
child restraint system to the anchor bars.
When the connectors are fastened, make
sure that the adjacent seatbelts are not
caught.
1) Inserting aid
NOTE
If your child restraint system is pro-
vided with inserting aids, clip them to
the two ISOFIX an chor bars before
connecting the child restraint system.
Position the two connectors just in
front of the two inserting aids. Then
insert the two connectors into the
inserting aids to connect the connec-
tors to the anchor bars.
The inserting aids make it easier to fit
the child restraint system with ISOFIX
and avoid damage to the seat.
To Next Page
Loading...
