Sun Microsystems StorEdge 3510 User Manual

Index-3
identification on chassis, 1-4
scaling, 4-25
Field-Replaceable Units, 1-5
field-replaceable units
Sun StorEdge 3510 FC array, 3-4
Sun StorEdge 3511 FC array, 3-5
filter entries
host, 6-42
firmware
controller failure, 9-2
controller voltage and temperature, 8-13
initial window, 6-2
logical drive status, 8-6
manual rebuild, 9-6
navigation keys, 6-3
SCSI channel status, 8-10
SCSI drive status, 8-8
upgrading, 8-22
view event logs, 8-18
Flash All Drives command, 9-9
flash drive time command, 9-9
flashing
all SCSI drives, 9-11
selected SCSI drives, 9-9
format command, 6-35
Front-Panel LEDs, 7-2
FRUs, 1-5
H
hardware PLD code version conflict, 7-4
hardware specifications, A-3
Host and Drive Channels, 4-11
host bus adapter
connecting to, 4-28
host channel
connecting two host to one channel, 5-20
limitations, 5-20
Sun StorEdge 3510 FC array, 4-14
Sun StorEdge 3511 FC array, 4-14
host channels, 4-11
data transfer speed
Sun StorEdge 3510 FC array, 4-14
Sun StorEdge 3511 FC array, 4-14
limitations, 4-14
host configuration
Linux, H-1
Solaris operating environment, F-1
Windows 2000, G-1
Windows NT, B-1, C-1, K-1
host connections, 4-28
Host Cylinder/Head/Sector Mapping
Configuration command, 6-18
host filter, 6-42
Host Filter Entries, 6-42
host IDs, adding, 6-8
host IDs, creating, 6-8
host LUNs
not visible, 9-2
host port
Sun StorEdge 3510 FC array, 4-14
Sun StorEdge 3511 FC array, 4-14
humidity, 2-3
I
I/O controller module, 1-5
ID switch, 4-26, B-6
Identifying a Failed Drive for Replacement, 9-8
identifying drives, 9-8
Identifying SCSI drive command, 9-9
in-band connections, 5-5
INCOMPLETE status, 8-7
initial firmware window, 6-2
INITING status, 8-7
INVALID status, 8-7
IP address, setting, 4-21
J
JBOD
single-bus configuration, B-12
split-bus configuration, B-12
K
keys to navigate, 6-3

Sun Microsystems StorEdge 3510 Specifications

General

Brand	Sun Microsystems
Model	StorEdge 3510
Category	Storage
Language	English