Innagator | Technical Pack143
HIGH VOLTAGE BATTERY
Scope
The installation and operation manual applies to
the modular battery energy storage system. Please
carefully read this installation and operation manual
to ensure the safe installation, preliminary debugging,
and maintenance of the High Voltage Series. Installa-
tion, preliminary debugging, and maintenance must
becarriedoutbyqualiedandauthorizedpersonnel.
Please keep this installation and operation manual
and other applicable documents near the battery en-
ergy storage system, so that all personnel involved in
installation or maintenance can access this installation
and operation manual at any time.
This installation and operation manual only applies
tocountriesmeetingthecerticationrequirements.
Please observe the applicable local laws, regulations,
and standards. Standards and legal provisions of oth-
er countries may be inconsistent with the provisions
andspecications.Inthismanual.Inthiscase,please
contact our after-sales service personnel, Tel: +852
2884 4318 Fax: +8522884 4816/ Email: www.sunsynk.
com / sales@sunsynk.com
High Voltage Series Battery Set
System energy 61.44 kWh (12 x 5.12kWh HV Battery)
Composition HVB750V/100A*1 [HV-SeriesM5.1*12]
BMS 1
13-way battery rack 1
Connectors and cabling Included
HV-Series Set
Symbols/Safety Signs
This symbol indicates information that if
ignored, could result in personal injury,
physical damage or even death due to
incorrect handling.
CE mark is attached to the solar
inverter to verify that the unit follows
the provisions of the European Low
Voltage and EMC Directives.
Risk of electric shock. Refer to the operating instructions.
STRICTLY, PRIVATE AND CONFIDENTIAL
To Next Page
Loading...