SunSynk INNAGATOR - Safety; Safety Rules; Safety Information

Innagator | Technical Pack147
To avoid property damage and personal injury, the following rules shall be followed when working on the
hazardous live parts of the battery energy storage system:
 It is available for use.
 Ensure that it will not restart.
 Make sure there is no voltage.
 Grounding protection and short circuit protection
 Cover or shield adjacent live parts.
Safety
Safety Rules
Part damage or short circuit may cause electric shock and death. A short circuit can be caused by connecting
batteryterminals,resultingincurrentow.Thistypeofshortcircuitshallbeavoidedunderanycircumstanc-
es. For this reason, follow these instructions:
 Use insulated tools and gloves.
 Do not put any tools or metal parts on the battery module or high-voltage control box.
 When operating the battery, be sure to remove watches, rings, and other metal objects.
 Do not install or operate this system in explosive or high-humidity areas.
 Whenworkingontheenergystoragesystem,rstturnothechargingcontroller,thenthebattery,and
ensure that they are not turned on again.
Safety Information
WARNING
1. DANGER OF DEATH: Improper use of the battery energy storage system can result in fatal injuries.
It is crucial to adhere strictly to the recommended guidelines and not misuse the system beyond
its intended purpose, as it can pose signicant risks to your safety.
2. LIFE-THREATENING RISKS: Mishandling the battery energy storage system can lead to severe inju-
ries or even loss of life. It is imperative to exercise caution and follow appropriate handling proce-
dures at all times.
3. DAMAGE TO BATTERY CELLS: Improper use can cause irreparable harm to the battery cells. To
prevent any damage, ensure that you use the system in accordance with the provided instructions
and avoid actions that might compromise the integrity of the battery cells.
4. AVOID EXPOSURE TO LIQUIDS: Keep the battery module away from rain and do not submerge it in
any form of liquid. Exposure to moisture can result in damage to the system and compromise its
performance, posing potential hazards.
5. AVOID CORROSIVE ENVIRONMENTS: Do not place the battery module in corrosive environments,
such as areas with ammonia or salt. Exposure to corrosive substances can lead to malfunctions
and jeopardize the safety of the system.
6. TIMELY DEBUGGING: It is essential to schedule a debugging session for the battery energy storage
system within six months of its delivery. This step ensures that any potential issues or malfunc-
tions are addressed promptly, minimizing the risk of accidents or performance degradation.
STRICTLY, PRIVATE AND CONFIDENTIAL