SunSynk INNAGATOR - Instructions for HVESS-Monitor Use; Main Page; Function List

Innagator | Technical Pack166
Instructions for HVESS-Monitor Use
Main Page
OFF
GENERAL
PCS
Base Info
Info
Parallel Info
HISTORY
Statistics
History Data
SETTINGS
BMS Parameter
BMU Parameter
Firmware
Manufacture
TYPE USBCAN_E
CLOSE INTER-CAN BUS
TYPE USBCAN1
OPEN PCS CAN BUS
Group
Life: 161
01
More Info.
PROTECTION
ALARM
2023
00:10
BATT TYPE EVE 100Ah
STATUS Static
SUB_STATUS 249
STATUS
Inter Volt 365.1V
Outer Volt 547.4V
Charge Volt 0.0V
ChgInStatus OFF
Board Temp 35ºC
Rrechg_Res_T 27ºC
ConnectorP_T 27ºC
ConnectorN_T 27ºC
Supply Volt 11.6V
DI OFF
DO ON
DO2 ON
Charge Cycle 7
Total Charge 0.00Ah
Total Discharge 504.08Ah
Positive
Precharge
Discharge
Charge
Battery Pos
Battery Neg
Exit
OFF
ON
OFF
OFF
OFF
OFF
OFF
SOC 49.7%
VOLTAGE 365.1V
DC
POWER 0.000Kw
TOTAL ENERGY 0.00MWh
CURRENT 0.0A
DC
HEALTH 100.0%
Max Cell Voltage
3.274V 3-4
Min Cell Voltage
3.266V 1-2
Max Temperature
25
o
C 1-4
Max Cell Voltage
24
o
C 1-1
Volt_01 1.268V
Volt_05 1.270V
Volt_09 1.270V
Volt_13 3.272v
Temp_01 24ºC
Temp_05 24ºC
Max Temp 25ºC
Max Volt 3.272V
DI ON
Summary Volt 52.3V
Hard Version HVMU01
Volt_02 1.266V
Volt_06 1.270V
Volt_10 3.272V
Volt_14 3.270V
Temp_02 24ºC
Temp_06 24ºC
Max Temp Pos 4
Max Volt Pos 13
DO ON
Inner Temp 30ºC
Volt_03 1.269V
Volt_07 1.268V
Volt_11 1.270V
Volt_15 3.270V
Temp_03 24ºC
Min Temp 24ºC
Min Volt 3.266V
ConnectorP_T 0ºC
Supply Volt 12.8V
Volt_04 1.268V
Volt_08 1.270V
Volt_12 1.268V
Volt_16 3.270V
Temp_04 25ºC
Min Temp Pos 1
Min Volt Pos 2
ConnectorN_T 0ºC
Soft Version 22071301
EMU01 [111] EMU02 [111] EMU03 [111] EMU04 [111] EMU05 [111] EMU06 [111] EMU07 [000] EMU08 [000]
kW
Function List
No.
Communica-
tion Category
Function
Category
Function Name Function Description
1
INTER-CAN BUS
Communica-
tioncongu-
ration
Communication
congurationof
CAN BUS
"INTER-CANBUS"or"PCSCANBUS"canbe
selected
Click the relevant button to start or stop the
communication with BMS.
2
Data display
Basic Information
1. Monitoring the total voltage, current, SOC,
and other core information
2. Monitoring relay switch information and
other general information
3. Monitoring the voltage and temperature of
he cell by BMU
4. Display the current alarm of the system by
category
Information on
parallel devices
Support display of a maximum of 50 parallel
devices information
3 History data History data Not available temporarily
4
History record
History record Read history information stored in BMS
5 History event Read history event information stored in BMS
STRICTLY, PRIVATE AND CONFIDENTIAL