EasyManua.ls Logo

SunSynk INNAGATOR - Guarantee

SunSynk INNAGATOR
186 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Innagator | Technical Pack23
Test Items & Loads Test Methods
Stacking Internal load: 1.8R-T
Test load : 86,400 kg/post.
Hydraulic cylinder load will be applied to each corner post
throughtopcornerttings.
Oset:25.4mmlateral
38.0 mm longitudinal
Time duration: 5 minutes
Lifting(fromtopcornertting)
Internal load: 2R-T
Lifting vertically.
Time duration: 5 minutes
Lifting(frombottomcornerttings)
Internal load: 2R-T
Lifting 45 deg. to the horizontal.
Time duration: 5 minutes
Restraint (longitudinal)
Internal load: R-T
Test load: 2R
Hydraulic cylinder load will be applied to the bottom side rails.
Two times for pulling and pushing.
Time duration: 5 minutes
Roof strength (weakest part)
Test load: 300 kg
Applied area will be 600x300 mm longitudinal and transverse.
Racking (transverse)
Test load: 15,240 kg
Hydraulic cylinder load will be applied to the header rail
throughtopcornerttings.
Two times for pulling and pushing.
Time duration: 5 minutes
Racking (longitudinal)
Test load: 7,620 kg
Hydraulic cylinder load will be applied to the top side rail
throughtopcornerttingononesideonly.
Two times for pulling and pushing.
Time duration: 5 minutes
Operation of door
After completion of test, the operation of doors, locks, hinges,
etc. will be checked.
Dimensions and weight
After completion of test, the dimensions and weight will be
checked.
Weatherproofness
Inside dia. of nozzle: 12.5 mm
Distance: 1.5 m
Speed: 100 mm/sec
Pressure: 1 kg/cm
2
**Note: R - Maximum Gross Weight, T - Tare Weight, P - Maximum Payload
Structure
The manufacturer guarantees that all containers will be free from defects in materials, workmanship, and
structure for a period of one (1) year from the date of acceptance by the buyer.
Guarantee
Painting
The paint system applied to the container surface is guaranteed to be free from corrosion and failure for a
period of three (3) years from the date of acceptance by the buyer.
CorrosionisdenedasrustingthatexceedsRE3(EuropeanScaleofdegreeofRusting)onatleastten(10)
percent of the total container surface, excluding damage resulting from impact or abrasion, contact with
STRICTLY, PRIVATE AND CONFIDENTIAL

Table of Contents