SunSynk INNAGATOR - Usbs Upgrade Step; Battery Module Storage

Innagator | Technical Pack183
USB's Upgrade Step
1. USB type: USB2.0, FAT32;
2. Create the upgrade folder according to the directory;
3. Placetheupgradeleprovidedbythesupplierintheupgradefolder;
4. Turnonthebattery,andinserttheUSBashdiskaftertheblueindicatorison;
5. Afterthebluelightindicatorashesandturnso,pullouttheUSBashdisktocompletetheupgrade.
Donotturnothebatteryduringtheprocess.
6. After the blue light indicator of the battery lights up again, check the version number through the screen
or app and verify the upgrade result.
Battery Module Storage
1. Toensurethebatteryservicelife,thestoragetemperatureshallbekeptbetween0°C~35°C.Thebattery
shall be cycled at least once every 6 months.
2. To minimize self-discharge in a long storage period, disconnect the BATTERY connection (1/2) of the
high-voltage control box of the DC connecting cable. This will interrupt the use of the 12 V power supply
installed in the high-voltage control box and prevent the battery from self-discharging.
STRICTLY, PRIVATE AND CONFIDENTIAL