SunSynk INNAGATOR - Technical Specification

Innagator | Technical Pack58
TECHNICAL SPECIFICATION
Model INNAGATOR 1
System Specication
AC Output/Input Power 400 kW
AC Output Frequency and Voltage 50/60Hz; 400Vac
O-GridBackUpPower 400 kW
O-GridSwitchingDuration 20 ms
Grid Type 3W+N+PE
THD <3%
Power Factor -1-+1
System Communication ETH
Black Start Yes
Fire Detection Heat and smoke detection
Fire Alarm Alarm panel, strobes and horns with UPS backup
Aux Load 10 kW
Auxiliary Power Interface 400Vac, 3W+N+PE
Auxiliary Power Back Up 30min (important load)
Local Emergency Stop Yes
RemoteStop/Shut-o Yes
Battery Technical Specication
EnergyConguration 980 kWh
Battery Operating Voltage 480 ~ 700 V
Battery Communication CAN,RS485
PackConguration 1P16S (16 Cells)
RackConguration 1P192S (16 Packs)
StackConguration 8*2*1P192S (16Racks)
Other Technical Specication
Dimension (L x W x H,mm) 6058*2438*2896 mm (238.50*95.98*114.02 in)
Weight Appr. 16500 kg
IP Rating of Enclosure IP54
Seismic Parameter Zone 4
Noise @1m Distance ≤75dB
Operating Temperature Range(ºC) -20~60( >45ºC derating)
Relative Humidity ≤95%(noncondensing)
Certication IEC62477,UN3536
Circuit Diagram
STRICTLY, PRIVATE AND CONFIDENTIAL