SWDM40 OPERATION & MAINTENANCE MANUAL
distance of two sides of track and platform trailer is the same.
5. Shut down the engine and take out the key. Push the control lever for several times till
pressure in hydraulic tank is released completely.
6. Push the pilot safety lever to the lock position.
7. Close doors and windows of the cab and cover the air outlet to prevent wind and rain.
8. Install the lock pin between upper-carriage and travel mechanism.
6.3.3 Tying Down the Machine
Place pads under two ends of track to prevent machine moving during transportation.
Tying down the machine with iron chains or steel ropes to prevent sliding during
transportation.
Note: Tying down iron chains or steel ropes on the H frame of the machine to keep that
away from hydraulic pipeline or hoses.
6.3.4 Driving Off a Platform Trailer
The procedure of driving off and onto the platform trailer is opposite. See details in
Chapter “6.3.2 Driving Onto a Platform Trailer”, and follow the opposite procedures.
To Next Page
Loading...