SUNWARD SWDM40 - Maintenance for Every 100 Hours; Checking Oil Level for Swing Reduction Gearbox; Checking Oil Level for Travel Reduction Gearbox

SWDM40 OPERATION & MAINTENANCE MANUAL
196
8.6 MAINTENANCE FOR EVERY 100 HOURS
Note is as the same as in chapter 8.3.14.
8.6.1 Checking Oil Level for Swing Reduction Gearbox
FIG. 8-6-1
Open oil level plug on the reduction gearbox to check gear oil which should be not lower 5mm
than the inner chamber top.
8.6.2 Checking Oil Level for Travel Reduction Gearbox
FIG. 8-6-2
Rotate travel reduction gearbox to the position as above figure, open reduction gearbox oil
plug to check whether there’s flowing gear oil.
Gear oil level
inspection
Oil level
inspection
hole