SWDM40 OPERATION & MAINTENANCE MANUAL
15 Before the machine operation, determine the conductor, contact and command mode.
In the assignment, follow the instructions issued by the conductor.
16 The operator must learn the instruction in advance, and on the basis of full
understanding and mastery. Contact us if there is any unclear situation.
17 Do not damage or remove the safety warning signs on the machine. Please replace
them if damaged.
18 After the machine leave factory, the customer will able to modified the specifications
and style, when our company accept. Any modification that reduces the safety
performance of the machine is prohibited.
1.7.2 Precautions for Working
1 Facing machine when go up/down the machine, use ladder and armrest to keep three
point contact machine, prevent fall.
2 Do not use any joystick, control rod, steel pipe, hose and cable as the handrails when
go up/down the machine. Keep the handrails and passageways clean, do not have
grease or dirt to prevent falling due to wet slip.
3 Do not go up/down the machine when it is walking or turning.
4 Before entering the cab, remove dirt and oil from the sole. If not, there could be
serious accident because of the slippage of the foot.
5 Do not leave parts or tools around the counter.
6 Do not place flammable and explosive items in the cab.
7 Concentrate on when driving or operating the machine, not listening to the radio or
using headphones/cell phone.
8 No smoking.
9 Do not store transparent bottles in the cab, as well as various transparent objects with
convex surfaces to prevent the focus of sunlight from causing fires.
10 Do not leave the lighter in the cab, because the temperature may be higher and the
lighter may explode.
11 The operator is forbidden to leave the cab while the machine is working.
12 In the process of operation or walking, the operator shall remind or prohibit other
personnel on the machine except from the driver. Because the crew on the machine is
easily thrown out or hit by a foreign object.
13 The driver has to sit on the seat of cab to start the engine. No starting machine on
track.
14 The method of short circuit is not allowed to start the engine(Including terminal start)
15 Before start the engine, make sure the surrounding area is safe, and honk the whistle
to alert attached operating personnel.
To Next Page
Loading...