SWDM40 OPERATION & MAINTENANCE MANUAL
8 MAINTENANCE AND SERVICE
Special note:
Regular and rigorous maintenance is essential to personal safety, the normal operation of the
machine and the extension of machine service life.
8.1 SAFETY INSTRUCTIONS FOR MAINTENANCE
8.1.1 Overview
In this chapter, it emphasizes some risks that may happen during maintenance for the drilling
machine.
Related details about safety information can be found in the corresponding chapter.
Check and maintain the machine as specified requirements in regular interval, and change parts
in comply with the replacement schedule.
Keep all handles, pedals and stairs without dust, snow, ice and oil.
Never allow unauthorized people to get close to the drilling machine during lubrication and
maintenance.
Wear specified safety device, such as safety clothes, protective goggles, and safety helmet.
Never spray water onto the electrical parts and joints while washing the machine, and take
measures to keep them dry.
Keep the machine body clean so as to find oil leakage, crack, connection parts loosen and other
abnormality, especially keep grease nozzle, breather hole and oil dipstick clean to avoid dust.
Only use parts specified by the manufacturer.
Never change, retrofitting or modify the drilling machine without the authorization from the
manufacturer.
Please contact with SUNWARD after-sales department when you have any questions about
lubrication and maintenance.
8.1.2 Note for Maintenance
8.1.2.1 Maintenance Personnel
Maintenance personnel should be professional for maintenance work, especially for electrical
system, hydraulic system, engine and each transmission system.
8.1.2.2 Risks during Service and Maintenance
The requirements in the chapter of lubrication and maintenance should be strictly observed.
Much attention should be paid for some dangerous parts during lubrication and maintenance.
To Next Page
Loading...