SWDM40 OPERATION & MAINTENANCE MANUAL
chemicals used in this machine, such as lubricant, coolant, paint, and adhesive may be
harmful.
2 Before using harmful chemicals, check and understand its danger; know how to use
them safely.
1.8 SAFETY FACILITIES
1.8.1 Emergency Exit
Emergency exit: A safety hammer is placed on the left side of the operator in case for
emergency and when the cab door is locked firmly, by which operator can smash the window
with emergency exit and escape from the machine.
1.8.2 Fire Extinguisher
This machine is equipped with a 1kg fire extinguisher, which is placed in the cab. In case
of fire, open the cab door quickly to take out the fire extinguisher. Pull out the safety catch,
press down the handle and aim at the fire bottom to spray.
1.8.3 Emergency Stop
There's a emergency stop button on the right of the control panel (as following figure).
Press down this button immediately to shut off all the drilling function in case of any emergency.
Pull back the button to operate after everythig is normal.
To Next Page
Loading...