SWDM40 OPERATION & MAINTENANCE MANUAL
3 Please have a first-aid kit and ensure that the first-aid drugs are within the effective
period.
4 Please have the telephone number of the doctor, ambulance, hospital and fire brigade.。
5 In case of abnormal equipment, you should press the emergency button immediately
and put the equipment in a safe state. The pilot or operator should report to safety
supervisor, after-sales and technical personnel immediately. Before finding the reason,
it is forbidden to start and operate the machine blindly.
6 If the weather is bad, such as heavy rain or strong wind, please stop the work
immediately(Wind speed to 10m/s），and put the equipment in a safe and stable
state(The drilling tool of Rotary drive is down to ground, the leader is slightly
backward, and the whole machine placed in the wind ).
7 When a storm or typhoon is forecast, the operation must be stopped in advance and the
state of the machine is processed: Use the auxiliary machine tool to stabilize the rig, or
take protective measures, for example, remove the
Rotary drive or drop the upright column.
1.6.2 Wearing Protective Devices
1 Before operation, always wear protective gear as
the work requires, this includes: tight work clothes,
hard hat, safe shoe, safety gloves
2 Safety glasses, goggles, or shield, Dust mask or respirator
3 Please fasten your safety belt when working at high altitude.
1.6.3 Keeping Machine Away From Power Transmission Line and Aerial
Obstacles
1 Any part or load of the machine that contact with power lines can cause casualties
2 If the machine must work in the high power line, contact the local power department
in time, cut off the power supply, and wear the protective equipment such as rubber
shoes and rubber gloves.
3 If the machine must be passed from the cable attachment, must have a signalman to
monitor the safety distance of the machine, and issue a warning in time.
4 Do not use any part of the machine or load near the power line, it must keep 5m safety
distance.
5 The machine should also be kept out of the air, especially when the rig is moving.
1.6.4 Fire Prevention
1 Prevent fire caused by leakages of fuel, hydraulic oil and lubricant.
●Check whether engine, reducer, cylinder, motor tubing and joints are damaged or flabby,
To Next Page
Loading...