SWDM40 OPERATION & MAINTENANCE MANUAL
FIG. 8-4-4 Lubricating oil filling plug
Note！
Less oil or too much oil in the engine crankshaft case both can result in the damage of the
engine.
12. Start engine to heat up the lubricating oil. Stop the engine to check engine for oil
leakage.
13. Wait for 30 minutes to let lubricating oil flows to crankshaft case. Check
lubricating oil level with oil dipstick and keep the oil level between the scale
“FULL” and “ADD”. Add or drain lubricating oil if the scale is exceeded.
Note
：
The engine is forbidden to start when discharging or adding engine oil, failure to comply may
result in serious damage to the engine.
FIG. 8-4-5 Dipstick
14. Cover the engine.
To Next Page
Loading...