SWDM40 OPERATION & MAINTENANCE MANUAL
Cleaning battery
Clean battery surface with a clean cotton and keep wire rod clean, apply Vaseline on it, then
install the cap.
Battery recycle
Please ensure the battery is recycled. Normally, used battery should be returned to one of
following places:
—Battery manufacturer
—Authorized battery collecting field
—Recycling plant
Tighten battery clamp
Tighten battery clamp to prevent battery moving when machine is running.
Changing battery, battery cable or battery cut-off switch change
1
）
Turn engine starting switch to OFF position, as below:
FIG. 8-10-1
2） Turn battery cathode switch to OFF position (cut-off) and take out the key,
as below：
FIG. 8-10-2
3）Disconnect cathode cable on the battery.
4）Disconnect anode cable on the battery.
5）Disconnect battery cable on the battery cathode switch, repair or change battery if necessary.
To Next Page
Loading...