OPERATION & MAINTENANCE MANUAL SWE18UF
7
(11) Lifting Direction Label
(12) Traction Hook
(13) Anti- scald Label
After running operation, engine oil, gear oil and
hydraulic oil is getting hot, so do engine, hoses,
pipelines or other components. Be cautious of
scalding.
Attempt inspection and maintenance procedure, after
machine components and oil cool down.
There is pressure in hydraulic oil tank. Relieve
pressure before opening cap to avoid oil spurt.
There is pressure which builds up in hydraulic piping.
Relieve pressure prior to repair or replacing.
（14）Be cautious with high pressure
Pressure should be released to avoid scalding by high temperature oil prior to opening the cap.
Release the pressure in hydraulic pipelines to avoid scalding by high temperature oil.
(15) Preventing Hands from Being Caught by Fan
Fan would run at high speed while engine is active.
Pay much attention to prevent hand, foot, hair and
clothing being caught in fan blade, when attempting
any inspection and maintenance procedures on
machine.
To Next Page
Loading...
