OPERATION & MAINTENANCE MANUAL SWE18UF
8
(16) Operation Label
This machine is equipped with two pilot control
handle and two travel control lever which control
working device motion, swing action of upper
structure, machine travel accordingly.
The right pilot joystick controls motions as below：
a. boom rise
b. boom fall
c. backhoe bucket load, or bucket in
d. backhoe bucket dump, or bucket out
Left pilot joystick controls motion as below：
e. upper-structure rotate anticlockwise
f. upper-structure rotate clockwise
g. arm out
h. arm in
Operation together with two pilot joysticks can also
take compound motion. In addition, horn switch
button is fixed on the handle.
Two travel control lever control forward motion,
reverse motion and steering of the machine.
（17）Direction Label
This label indicates travel direction of machine when
“travel control lever is pushed forward”.
Warning
In case that driving wheel is located at the back of cab,
machine will travel rearward when pushing “travel
control lever” forward. (On this occasion, symbol
indicates backward).
(18) No Stepping Label
Warning
Stay clear of operation area of working device.
To Next Page
Loading...
