Supermicro X14SAE - Page 96

Active Efficient-cores
This feature determines how many efficient cores will be activated for each processor package.
When all is selected, all cores in the processor will be activated. The options are All, 15, 14, 13,
12, 11, 10, 9, 8, 7, 6, ,5, 4, 3, 2, and 1.
Note: The number of cores depend on the processor used in the system.
AES
Select Enabled to use the Intel Advanced Encryption Standard (AES) to ensure data security.
The options are Disabled and Enabled.
Boot Performance Mode
This feature allows you to select the performance state that the BIOS will set before the
operating system handoff. The options are Max Non- Turbo Performance and Turbo
Performance.
Intel
®
SpeedStep™
Intel SpeedStep Technology allows the system to automatically adjust processor voltage and
core frequency to reduce power consumption and heat dissipation. The options are Disabled
and Enabled.
Intel
®
Speed Shift Technology
Use this feature to enable or disable Intel Speed Shift Technology support. When this feature is
enabled, the Collaborative Processor Performance Control (CPPC) version 2 interface will be
available to control CPU P-States. The options are Disabled and Enabled.
Turbo Mode (Available when "Intel SpeedStep" or "Intel Speed Shift Technology" is set
to Enabled)
Select Enabled to allow the CPU to operate at the manufacturer-defined turbo speed by
increasing CPU clock frequency. This feature is available when it is supported by the
processors used in the system. The options are Disabled and Enabled.
Power Limit 1 Override
Select Enabled to support average power limit (PL1) override. The options are Disabled and
Enabled.
Power Limit 2 Override
Select Enabled to support rapid power limit (PL2) override. The options are Disabled and
Enabled.
96
X14SAE/X14SAE-F: UEFI BIOS